ASHPlan - pay monthly service plan

Includes all items listed below plus:

1 FREE callout per year outside of service schedule

UFH balance check 

Radiator bleeding

Protective coating for external insulation as required

Includes all items listed in heat pump plus:

Check and clean the cartridge from the pressure-reducing valve (PRV)
Check the strainer and, if necessary, remove any debris and replace the cartridge
Check the charge pressure in the expansion vessel and top up as necessary
Manually lift the expansion relief and temperature and pressure relief valves one at a time and check for adequate discharge
Check that the discharge to waste is correct and unobstructed
Check that each of the valves seal correctly when released
Test the immersion heater and thermostat function
Check the immersion heater resistance
Complete electrical ground check
Ensure cylinder sensor is correctly located, securely fitted and operating correctly
Update annual servicing record for the product

Assess the visual condition of the heat pump
Check for any debris/obstructions in the evaporator fins and remove if found
Check that the fan outlet is not obstructed and remove any debris
Check that the condensate drain opening is clear
Assess the condition of the flexible hose and pipe insulation
Check the remote controller settings
Check that no refrigerant is leaking
Spray the evaporator with ACF50
Spray then clean the coil with G2G-Universal Coil Cleaner
Check the expansion vessel pressure and operation of pressure relief valve
Assess the heating system pressure and top up if necessary
Check the antifreeze concentration level
Check the heating and hot water controls settings
Check for any sign of leakage from the refrigerant circuit
Clean the magnetic filter
Update annual servicing record for the product